Transmission sprocket

Having been more than twenty years in the industry , we continue to improve our goods/quality and services as one of the market leaders today.
Why Ever-power?
Carburized Bushing
Carburizing process increases surface area hardness and wear resistance, as the core remains challenging and ductile.
Shot Peening to All Components
All Omega’s conveyor chain parts are very well shot peened, in order to increase component life.
Ultimate Material Specification
New materials specification with better strength in chain breaking load, yet is still the most cost-effective choice.
Professional Technical and Item Support
Supported by experienced workforce and established branches in strategic locations throughout China
Transmission Sprocket Installation
1. Install the tranny sprocket (with belt) on the main drive equipment. 2. Install the sprocket nut. The following procedure is based on whether a fresh or used nut is being installed. Note: The Transmission Sprocket nut has kept handed threads. Convert the nut counterclockwise to set up on the key drive equipment. Sprocket Nut: apply crimson thread lock to the threads of the sprocket nut. Likewise smear a small quantity of reddish colored thread lock or clean engine oil on the inside encounter of the sprocket nut and the exterior experience of the sprocket. Limit the application form to where in fact the surfaces of the two parts contact each other. Install the sprocket nut until finger tight. 3. Obtain Last Drive Sprocket Locking Instrument (BAKER P/N: Tool-C) to lock tranny sprocket. Proceed as follows: A. Insert deal with of instrument below pivot shaft inboard of bottom level frame tube and attach to sprocket. B. Snug thumbscrew to lock situation of software on sprocket. 4. Obtain Mainshaft Locknut Wrench/Pilot (BAKER P/N: Tool-D). Proceed the following: A. Install pilot on threaded end of mainshaft. B. Slide sleeve of locknut wrench over pilot and onto sprocket nut. C. Tighten sprocket nut to 60 ft-lbs. (81 Nm). As the nut is usually tightened the take care of of the sprocket locking device rises to contact the pivot shaft, thus avoiding sprocket/mainshaft rotation. 5. Scribe a straight series on the tranny sprocket nut ongoing the line over onto the tranny sprocket. Tighten the transmitting sprocket nut yet another 35 to 40 degrees. 6. Install lockplate over nut in order that the two diagonally contrary holes align with two tapped holes in sprocket. To find the best in shape, lockplate can be rotated to a number of positions and can be positioned with either aspect facing sprocket. 7. If holes in lockplate usually do not align with those in sprocket, tighten sprocket nut as necessary (up to 45 degrees maximum) until sprocket and lockplate holes are in alignment.

V-FACTOR
24 Tooth Sprocket Kit
Fits Big Twin 4 speed with rear disc

Tags:

worm gearboxes

As one of leading worm gearboxes manufacturers, suppliers and exporters of products, We offer worm gearboxes and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm gearboxes.

Recent Posts