ansi 6 inch stainless steel worm type butterfly valve

Overview

Quick Details

Type:

Butterfly Valves

Place of Origin:

Zhejiang, China

Brand Name:

EPT

Model Number:

JRVAL -010

Application:

General

Temperature of Media:

Medium Temperature

Power:

Pneumatic

Media:

Water

Port Size:

50-300

Structure:

Butterfly

Working pressure:

0.15~0.8MPa

Warranty:

1year

Seal Material:

PTFE Seal

Working Temperature:

10-110

Disc:

WCB+stainless Steel

Name:

ductile iron butterfly valve body

Medium:

Oil Water Gas

Keyword:

ductile iron butterfly valve ptfe lined

MOQ:

1

Packing:

Carton Box

Packaging & Delivery

Selling Units:
Single item
Single package size:
30X20X10 cm
Single gross weight:
8.000 kg
Lead Time
:
Quantity(Sets) 1 – 1 2 – 10 >10
Est. Time(days) 3 5 To be negotiated

Online Customization

01

01

ansi 6 inch stainless steel worm type butterfly valve

03

Size (inch)

Face to face

(mm)

Piece weight

(kgs)

Thickness of body (mm)

Thickness of upper flange (mm)

3

45.2

4.9 +/- 5%

7.5

12.3

4

51.9

6.0 +/- 5%

7.5

13

5

53.5

8.0 +/- 5%

7.5

13.5

6

54.2

9.5 +/- 3%

8.9

14.5

8

58.5

15.0 +/- 3%

1.2

16

06

04

1. Check whether the specifications, pressure, temperature and corrosion resistance of the butterfly valve meet the requirements before use. Inspect all parts for damage or looseness.

2. This butterfly valve can be installed on pipelines with any angle. It should be closed for installation. When welding pipeline flanges, the valve sealing mouth should be blocked with a plate to prevent particles and debris from contaminating the sealing surface. After welding, remove the valve, Clean the sealing surface and the inner cavity of the pipe before installing the fixed valve.

3. Before installation, wipe the sealing surfaces (both sealing surfaces at both ends, disc sealing surfaces, and valve seat sealing surfaces) thoroughly to remove dust and dirt.

4. The butterfly valve should be tested empty before installation. The opening and closing should be flexible.

5. Manual operation is closed clockwise and open counterclockwise. After the pointer indicates the position is not allowed to open and close the valve.

6. Tighten the bolts symmetrically and alternately, and do not allow individual tightening in sequence.

7. The limit screw has been adjusted before leaving the factory, and cannot be easily adjusted. If the drive device is configured to be electric or pneumatic, please refer to the instruction of the corresponding drive device.

8. The opening and closing stroke of the control mechanism has been adjusted when the electric butterfly valve leaves the factory. In order to prevent the direction from being wrong when the power is turned on, the user must manually open it to the half-open position before pressing the power, and then press the jog switch to check that the direction of the indicating plate is the same as the direction of the valve opening.

9. When the valve is found to be malfunctioning, the cause should be identified for repair and elimination to prevent the valve from being opened and closed by force, which will cause damage to the valve.

05

worm gearboxes

As one of leading worm gearboxes manufacturers, suppliers and exporters of products, We offer worm gearboxes and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm gearboxes.

Recent Posts